Porsche Cayenne Engine Mount Set Left & Right - 94837504901 + 94837505001

This engine mount set (94837504901 + 94837505001) is specifically designed for first-generation Porsche Cayenne S, Turbo, and GTS models from 2003-2010 (chassis codes 955 and 957). It fits Cayenne models equipped with V8 engines including the 4.5L V8, 4.8L V8, and twin-turbocharged variants. This set is NOT compatible with:

Base Cayenne V6 models (different mount design)

Second-generation Cayenne (92A chassis, 2011-2017)

Third-generation Cayenne (PO536 chassis, 2018+)

To verify exact compatibility, check your vehicle's VIN number and confirm your model year and engine type. The best way to ensure fitment is to cross-reference the part numbers with your existing mounts or consult with a Porsche specialist. Key identifiers: if your Cayenne was manufactured between 2003-2006, it's a 955 chassis; 2007-2010 models are 957 chassis. Both use the same engine mounts for V8 variants. Our technical support team can assist with VIN-based verification to guarantee these mounts are correct for your specific Cayenne configuration

Replacing both left and right engine mounts simultaneously is strongly recommended for several critical reasons, especially in high-performance vehicles like the Cayenne S, Turbo, and GTS:

Balanced wear patterns: Engine mounts age together under the same stress conditions. When one mount fails, the other has experienced similar wear and is likely near failure—replacing just one mount places excessive stress on the old mount, often causing it to fail within months.

Optimal performance restoration: Mismatched mounts (one new, one old) have different stiffness characteristics, creating uneven engine support that can lead to vibrations, noise, and poor driving dynamics. New matched pairs restore factory-spec vibration dampening.

Cost savings: Replacing both mounts in a single service eliminates duplicate labor costs. Engine mount replacement on Cayenne V8 models is labor-intensive (3-5 hours), so doing it twice costs significantly more than addressing both sides at once.

Prevent cascading damage: Failed mounts allow excessive engine movement, which can damage transmission mounts, exhaust hangers, turbocharger plumbing (Turbo models), and other drivetrain components. Installing a complete set prevents this stress transfer.

High-performance demands: Cayenne S, Turbo, and GTS models produce 340-500 HP and substantial torque. The V8 engine's power delivery places extreme stress on mounts—mismatched support can't handle these forces properly, especially during hard acceleration or spirited driving.

Common symptoms of failing engine mounts in Cayenne S/Turbo/GTS models include:

Vibration-related: Excessive engine vibration at idle (especially in Drive or Reverse), vibrations felt through the steering wheel or seats, and increased harshness throughout the RPM range that wasn't previously present.

Noise indicators: Loud clunking or banging sounds during hard acceleration or deceleration, metallic rattling from the engine bay, thumping noises when shifting between Park/Drive/Reverse, and knocking sounds over bumps or during throttle transitions.

Visual/physical signs: Visible engine movement in the bay when revving the engine or applying throttle, misaligned exhaust components or intake piping, cracked or separated rubber visible on mount inspection, and oil seepage from hydraulic mounts.

Performance issues: Harsh transmission shifting, drivetrain vibrations during acceleration, and in Turbo models, potential contact between turbocharger components and chassis during engine movement.

Regarding installation: Professional installation is strongly recommended for several reasons:

Complexity: Cayenne engine mount replacement requires specialized lifting equipment, engine support systems, and precise procedures to safely support the V8 engine while removing mounts.

Special requirements: Turbo models require extra care due to turbocharger proximity—improper installation can damage boost pipes, oil lines, or cause component interference. Torque specifications must be followed precisely to prevent mount failure or chassis damage.

Time and tools: The job typically takes 3-5 hours and requires Porsche-specific tooling, diagnostic equipment for final verification, and expertise with high-performance SUV systems.

Safety: Improper installation can result in engine damage, mount failure, or safety hazards. Professional technicians verify all clearances, check for related wear in transmission mounts and torque struts, and ensure proper alignment of all engine bay components.

Warranty protection: Professional installation with documentation helps maintain warranty coverage and provides recourse if issues arise post-installation.