Mercedes-Benz S500 S580 S580e Front Lower Control Arm Right Side A2233301600 (2021-2024)

Common symptoms of a failing right control arm include:

Driving dynamics: Vehicle pulls to the right during acceleration or braking, vague or imprecise steering feel, wandering at highway speeds, difficulty maintaining straight-line tracking, poor steering return after right turns, and unstable handling characteristics that weren't previously present.

Noise indicators: Clunking or knocking sounds from the right front when driving over bumps, squeaking or creaking during right turns, rattling from the passenger side suspension, popping sounds when turning the steering wheel, especially noticeable at low speeds or in parking lots.

Tire wear patterns: Rapid or uneven wear on the right front tire, particularly excessive wear on either the inner or outer edge (feathering pattern), difficulty maintaining alignment specifications after professional service, and tires showing unusual cupping or scalloping patterns.

Visual inspection signs: Cracked, torn, or deteriorated rubber bushings visible on the control arm, excessive play or movement in the ball joint when the wheel is lifted and tested, grease leaking from the ball joint boot, visible damage or deformation to the control arm itself.

Regarding replacing both sides: Unlike engine mounts that should always be replaced in pairs, control arms can be replaced individually based on which side has failed. However, consider these factors:

Replace single side if: Only one side shows wear/damage, the vehicle is relatively new (under 50,000 miles), recent inspection confirmed the opposite side is in good condition, or budget constraints require addressing only the failed component.

Consider replacing both sides if: Vehicle has high mileage (over 80,000 miles), both sides show wear during inspection, you've experienced harsh driving conditions (rough roads, potholes, aggressive driving), or you want to ensure balanced suspension performance and avoid a second service visit soon. Many technicians recommend replacing both sides on high-mileage luxury vehicles to prevent the inconvenience and additional labor cost of replacing the second side shortly after the first.

Cost consideration: While parts cost doubles, labor savings are significant—replacing both sides simultaneously eliminates duplicate labor for a second service visit and requires only one alignment service instead of two.

Professional installation is essential for several critical reasons specific to S-Class vehicles:

Safety-critical component: Control arms directly affect steering, handling, and vehicle stability. Improper installation can result in loss of control, catastrophic component failure, or accidents. This isn't a component where DIY mistakes are forgivable—your safety and that of others depends on correct installation.

Complex suspension systems: W223 S-Class models feature AIRMATIC air suspension and E-ACTIVE BODY CONTROL, which are sophisticated systems requiring:

Proper depressurization of air suspension before service
Specialized diagnostic equipment to prevent system faults
Recalibration after installation using Mercedes XENTRY diagnostics
Knowledge of hybrid-specific procedures for S580e models

Precision torque specifications: Control arm mounting bolts must be torqued to exact specifications (typically 100+ Nm) in a specific sequence. Under-torquing risks component separation; over-torquing can damage threads or cause premature bushing failure. These fasteners are often torque-to-yield and require replacement.

Special tools required: Ball joint separator (without damaging components), suspension support stands, hydraulic press (if bushings need separate replacement), precision torque wrenches, and Mercedes-Benz specific tools for AIRMATIC systems.

Mandatory four-wheel alignment: After control arm replacement, professional alignment is absolutely required—not optional. The new control arm changes suspension geometry, and driving without proper alignment will:

Cause rapid, uneven tire wear (potentially destroying new tires in weeks)
Create handling issues and pulling
Prevent AIRMATIC and E-ACTIVE systems from functioning correctly
Void warranties on suspension components

Alignment specifications: S-Class alignment requires precision equipment capable of measuring camber, caster, toe, and thrust angle to within 0.1 degrees. Home mechanics cannot achieve this accuracy.

Installation process overview: Lift vehicle safely, remove wheel, disconnect AIRMATIC air lines (if equipped), separate ball joint using proper tools (without damaging steering knuckle), remove control arm bolts in correct sequence, install new control arm with new hardware (bolts are often single-use), torque all fasteners to specification, reconnect air suspension, lower vehicle, perform four-wheel alignment, and recalibrate AIRMATIC/E-ACTIVE systems using Mercedes diagnostic equipment.

Time and cost: Professional installation typically takes 2-3 hours plus alignment (1-1.5 hours). Total service time is 3.5-4.5 hours. While this represents significant labor cost, it ensures your $100,000+ luxury vehicle is serviced correctly and safely, protecting your investment and ensuring the legendary S-Class ride quality is fully restored.

Yes, we ship to most countries worldwide.

You can track your order directly through our website by following these steps:

1. Go to the Europarts360 Tracking Page.
2. You will see an option to search by Tracking Number or Order ID.
3. Enter your number in the search bar.
4. Click the "Track" button to view the current status of your shipment.

We offer a 14-day return policy for all unused items in original packaging.

This warranty covers all eligible products purchased through our website for 6 months from the date of purchase.