Genuine Range Rover Lower Control Arms & Land Rover OEM Spares

The control arm is the foundational anchor of a Land Rover's suspension, supporting a heavy luxury SUV while delivering a composed ride. Whether you drive a Range Rover Sport, a flagship L405 Range Rover, or an Evoque or Velar, the arms manage the kinetic energy generated during heavy braking, cornering and off-road articulation, working alongside the electronic air suspension to maintain alignment and cabin quiet.

The Wear Sequence

When the hydro-bushings tear or the integrated ball joints develop play, the symptoms arrive in order: steering shake under braking, then metallic clunking over speed bumps, then vague handling, then inner-edge tyre wear misdiagnosed as an alignment fault. On higher-mileage L405 Range Rovers, worn control arm bushings are the single most common cause of the knocking and steering imprecision owners report.

What to Know Before Ordering

Replace the arm, not the bushing. Land Rover supplies most arms complete with the bushing and ball joint pressed in — that is the intended and durable repair.
A four-wheel alignment is mandatory afterwards. Skipping it produces exactly the tyre wear the repair was meant to cure.
Check the earths before condemning suspension hardware. Corroded grounding points behind the front fender liners on L405 models are a known cause of false electronic suspension warnings misdiagnosed as strut failure.
Mass drives wear. Bushings on a two-and-a-half tonne vehicle wear on a schedule set by weight rather than mileage, so low-mileage examples still need inspection.
Generations differ. L322, L405 and L460 share very little — the L322 was engineered under BMW ownership on a steel monocoque, the L405 is an all-aluminium JLR design. Check chassis code before ordering.

Inferior metallurgy and low-grade rubber cannot withstand the weight and torque of a modern Land Rover, leading to repeated failures. We supply genuine components and premium OEM replacements from chassis specialists including Lemförder and TRW.

Related Categories

Full Land Rover catalogue → · All lower control arms → · All upper control arms → · Air suspension compressors → · Shock absorbers → · Wheel hubs & bearings → · Axle & steering →

Bolts won't line up on the new arm? Read our guide on control arm bolt alignment →

Frequently Asked Questions

The hallmark symptoms include a heavy clunking or knocking sound from the front suspension when driving over bumps or pulling into driveways. You may also experience a pronounced vibration or "shudder" in the steering wheel during heavy braking, a feeling that the vehicle is "wandering" on the highway, and rapid, uneven wear on the inner or outer edges of your front tires.
While Land Rover does sell replacement hydro-bushings (fluid-filled rubber mounts) for some models, pressing them out requires specialized heavy-duty hydraulic tools. Furthermore, the ball joint on the other end of the control arm is usually permanently integrated and cannot be replaced separately. For optimal safety, labor efficiency, and longevity, replacing the entire lower control arm assembly is highly recommended.
Land Rover partners with the world’s top European chassis engineers. When you purchase premium OEM control arms from Europarts360, you are typically receiving components manufactured by Lemförder or TRW. These are the exact same brands that supply the parts for the assembly line in Solihull, England.
Yes. A failing lower control arm allows the wheel hub to move outside of its intended geometric path. This places immense lateral stress on the air struts and height sensors. Driving on worn control arms for an extended period can lead to premature air strut failure, which is a significantly more expensive repair.
Absolutely. Replacing any major suspension component inherently alters the camber, caster, and toe angles of your wheels. Even with a perfect Genuine part, failing to get a professional alignment right away will result in a crooked steering wheel and quickly destroy your expensive luxury SUV tires.
Many modern Range Rovers (like the L405 and L494 Sport) utilize a sophisticated multi-link double-pivot front suspension. This means there is a "forward" lower control arm and a "rearward" lower control arm (often called a thrust arm or tension strut). We stock both components to ensure a complete and proper repair.
A full-size Range Rover can weigh well over 5,000 pounds. Cheap aftermarket control arms use solid, low-grade rubber instead of the complex, fluid-filled hydro-bushings required to dampen the specific NVH (Noise, Vibration, and Harshness) of a Land Rover. Using them results in a harsh, truck-like ride and they often fail within just a few thousand miles.
Yes, it is standard best practice to replace suspension components in axle pairs. If the heavy-duty bushing on the driver's side has failed due to age and mileage, the passenger side has endured the exact same stress and is likely on the verge of failure. Replacing them together restores balanced handling and saves you the cost of a second alignment.
Yes. Our extensive catalog covers the entire Land Rover family, from the classic L322 and modern L405 full-size Range Rovers to the dynamic Range Rover Sport, the sleek Velar, and the compact Evoque.
- Genuine Parts: These are the exact components installed at the factory, arriving in the original vehicle manufacturer’s branded packaging (e.g., Porsche or BMW).
- OEM Parts: These are produced by the same manufacturers that supply the car brands (e.g., Bosch, Brembo, Lemförder) but are sold in the supplier’s own packaging, often at a more competitive price.
- Aftermarket Parts: These are third-party components designed to meet or exceed original specifications.