OEM Upper Control Arm | Genuine European Car Control Arms

On most modern European and exotic vehicles, the upper ball joint is permanently pressed or forged into the aluminum or steel arm during manufacturing. Because it is a non-serviceable unit, the entire upper control arm assembly must be replaced. This ensures you have a fresh, factory-tight ball joint and new bushings, providing a much safer and longer-lasting repair.

The terms are often used interchangeably. A "wishbone" specifically refers to an A-shaped or V-shaped control arm that has two mounting points to the chassis and one to the steering knuckle. This "double-wishbone" setup is common in high-end European cars because it offers superior control over wheel movement compared to a standard strut.

A high-pitched "creak" or "squeak" during low-speed maneuvers or when going over speed bumps is a classic sign of a dried-out upper ball joint. When the internal grease escapes or becomes contaminated, the metal-on-metal friction creates a loud squeak that signals the joint is on the verge of seizing or snapping.

Yes, absolutely. The upper control arm directly dictates the "camber" (the vertical tilt of the wheel). Even with a perfect Genuine replacement, the slight variations in the new bushings will alter your alignment. Failing to get a professional four-wheel alignment immediately after installation will quickly ruin your expensive tires.

European automakers partner with elite chassis specialists. When you purchase premium OEM control arms from Europarts360, you are typically receiving components manufactured by Lemförder, TRW, or Sidem—the exact same companies that supply the factory assembly lines in Germany, Italy, and the UK.

Yes. Suspension components are subject to the same road conditions and mileage. If the ball joint on the driver-side arm has failed, the passenger-side arm is likely in a similar state of fatigue. Replacing them as a pair (left and right) ensures symmetrical handling and prevents you from having to pay for a second alignment in the near future.

Many modern performance vehicles utilize forged aluminum upper control arms to reduce "unsprung weight." A lighter suspension can react faster to road imperfections, which improves both the ride quality and the vehicle's ability to maintain grip during aggressive driving.

While the arm itself is mechanical, a loose ball joint can cause excessive wheel vibration. This vibration can sometimes interfere with the wheel speed sensor (ABS sensor) signal, causing the vehicle's computer to trigger ABS or Traction Control warning lights.

• Genuine Parts: These are the exact components installed at the factory, arriving in the original vehicle manufacturer’s branded packaging (e.g., Porsche or BMW).
• OEM Parts: These are produced by the same manufacturers that supply the car brands (e.g., Bosch, Brembo, Lemförder) but are sold in the supplier’s own packaging, often at a more competitive price.
• Aftermarket Parts: These are third-party components designed to meet or exceed original specifications.