Aston Martin DBX Parts

Free Shipping over $300

Get Special Pricing

Aston Martin DBX Parts Guide

What Are Aston Martin DBX Parts?

Aston Martin DBX parts are precision-engineered OEM components designed for Aston Martin's first luxury SUV combining 542-697 hp performance with all-terrain capability. These genuine parts ensure optimal performance and preserve your $180,000-$240,000 investment. According to Aston Martin's 2024 service data, DBX models maintained with OEM parts experience 42% fewer mechanical issues and retain superior resale values compared to aftermarket alternatives.

Shop genuine and OEM Aston Martin DBX parts and exhaust components for the DBX and DBX707, both powered by the 4.0-litre twin-turbo V8 developed with Mercedes-AMG. This page covers the DBX parts we can source, from brakes and filters to cooling, suspension and body components. Exhaust parts are sourced to order. If the part you need isn’t listed, send your VIN or part number and we will source it and confirm price and lead time.

Aston Martin DBX Parts by Model

The DBX has been built since 2020 and comes in two main versions: the standard DBX, and the higher-output DBX707. The two share much of their mechanical specification, but they differ in some engine, cooling, exhaust and brake details, so confirm the version before ordering.

Model Years Engine What to know when ordering
DBX 2020 onward 4.0-litre twin-turbo V8 Mercedes-AMG-derived V8 and nine-speed automatic. Confirm by VIN before ordering engine, cooling and exhaust parts.
DBX707 2021 onward 4.0-litre twin-turbo V8, higher output Uprated engine and its own specification for some cooling, exhaust and brake parts. Do not assume parts are interchangeable with the standard DBX.

Not sure which DBX you have? Your VIN identifies the version and build, and we check every part against it before dispatch.

Aston Martin DBX Exhaust Parts

The DBX exhausts through a twin-turbo V8 system, with catalytic converters and exhaust sensors ahead of the rear section. Exhaust parts differ between the standard DBX and the DBX707, and some markets run particulate filters, so confirm the system by VIN before ordering.

DBX exhaust components we can source

  • Exhaust gaskets and sealing rings
  • Exhaust clamps, springs and flange hardware
  • Intermediate and rear pipes, left and right
  • Heat shields and brackets
  • Mounts and hangers
  • Catalytic converters and particulate filters, where applicable
  • Lambda (oxygen) sensors

Send your VIN or part number for a quote and lead time. You can also browse exhaust & cooling system parts.

Genuine exhaust parts vs. aftermarket systems

Most owners searching for a DBX exhaust are comparing aftermarket systems, such as sport or valved exhausts from specialist makers, usually chosen for sound and weight. We supply genuine and OEM parts, so we don’t sell those systems. If you are weighing one, confirm that it fits your exact version, check local noise and emissions rules, and be aware that a performance system can affect inspection results and warranty cover. When original exhaust components wear out, genuine or OEM replacements keep the car to factory specification.

Aston Martin DBX Body Kit vs. Genuine DBX Body Parts

“Body kit” usually means an aftermarket aero or widebody package — front and rear lips, side skirts, diffusers, wheel arch extensions and sometimes roof or bonnet pieces — sold by specialist tuners, often in carbon fibre. Those kits are sold in very limited runs and at high prices, and we don’t sell them. We supply genuine and OEM DBX body parts, which is what you need for a repair, a refresh or a restoration to factory specification.

DBX body parts we can source

  • Front and rear bumper covers and lower spoilers
  • Grilles, side intakes and air vents
  • Side skirts and sill trim
  • Mirrors, lighting and badges
  • Gas struts for the bonnet and tailgate

These are sourced to order, and body parts are specific to version, model year and body style. Send your VIN or the OEM part number for a quote. You can also browse body parts for European cars.

Before you fit a body kit

  • Fitment is version-specific. A kit made for one version may not fit another, so check the DBX or DBX707 specification.
  • Check what sits behind the panels. Bumper, wheel arch and grille changes can affect parking sensors, cooling airflow and underbody panels.
  • Keep the original panels if you may want to return the car to factory specification.
  • Think about road legality, insurance and value before you commit.

Aston Martin DBX Brake Parts

Brake pads and discs for the DBX depend on the version and on whether the car has carbon ceramic brakes. Conventional pad compounds can damage a ceramic friction layer, and ceramic discs cannot be resurfaced, so confirm the brake specification by VIN before ordering.

  • Front and rear pad sets for steel-disc cars, with the wear sensor replaced at the same time as the pads
  • Ceramic-specific pads for cars fitted with carbon ceramic brakes
  • Front and rear brake discs, where available

The wear sensor is single-use and should be replaced with the pads. A squeal or pulsing pedal can also point to a worn disc, so inspect the discs whenever you change pads.

Aston Martin DBX Parts by Category

DBX Service Priorities

Air suspension

Where fitted, the air suspension works as one connected system. A leaking air spring or strut can run the compressor continuously until it fails, so catching a leak early often saves the compressor. Replace struts and springs in axle pairs, and check ride height after any suspension work.

Cooling and the twin-turbo engine

The turbochargers and their cooling loops run hot, and access in the engine bay dominates the labor in any cooling repair. Replace hoses, clamps, O-rings and the expansion tank in the same visit, and inspect them at every service. Rubber and plastic parts harden on a calendar basis, especially in hot climates.

Oil filtration and service kits

Service intervals are set by time as well as distance. Order the complete service set so single-use seals and washers are not missing when a service stalls halfway. Browse our service kits, and send your VIN to confirm the correct oil filter for your version.

Brakes

Brakes are a consumable on a heavy, fast SUV. Confirm steel or carbon ceramic before ordering pads, replace the single-use wear sensor with the pads, and inspect discs for scoring and pitting.

Standing and low mileage

Many DBX cars cover low annual mileage. Service annually regardless of distance, use a battery conditioner if the car is stored, and inspect bushings, hoses and brake discs on a calendar basis.

How to Order the Right DBX Part

  1. Identify your car — DBX or DBX707, model year and brake system. Your VIN confirms it.
  2. Find the part number — it is often marked on the old part or its label.
  3. Check the side and position — left or right, front or rear, and bank for sensors.
  4. Send us the VIN and part number through the contact page. We verify fitment before dispatch.

Why Order DBX Parts from Europarts360

  • Parts clearly labeled as genuine, OEM or aftermarket, and checked against your VIN before dispatch
  • Version-aware fitment, including the DBX and DBX707
  • Sourcing for specialist and low-volume components
  • Shipped worldwide from our United States and United Arab Emirates warehouses, depending on stock, with free shipping over $300 (see our shipping information)
  • Covered by our warranty policy
  • Trade and workshop pricing through our wholesale page

Related Aston Martin Parts

Vantage parts · Vanquish parts · DB11 parts · Full Aston Martin catalogue

Frequently Asked Questions

Do you sell Aston Martin DBX exhaust parts?

We can source genuine and OEM DBX exhaust components to order, including gaskets, clamps, pipes, heat shields, mounts, catalytic converters where applicable and lambda sensors. We don’t sell aftermarket performance exhaust systems. Send your VIN and we will confirm what is available for your version.

Do you sell a DBX body kit?

We don’t sell aftermarket body kits. We supply genuine and OEM DBX body parts, such as bumpers, grilles, sills, mirrors, lighting and trim, sourced to order. If you are fitting a kit from a tuner, check fitment for your exact version, plus road-legality rules, insurance and warranty.

What is the difference between the DBX and DBX707?

Both use a 4.0-litre twin-turbo V8, but the DBX707 has higher output and its own specification for some engine, cooling, exhaust and brake parts. Always confirm by VIN before ordering.

Are your Aston Martin DBX parts genuine?

Each listing says whether the part is genuine, OEM or aftermarket. Genuine parts are supplied in Aston Martin packaging. OEM parts are made by the suppliers that build components for the factory and are sold in the supplier’s own packaging. Every part is checked against your VIN before dispatch.

Which DBX models do you supply parts for?

The standard DBX from 2020 onward and the DBX707. Not every part is listed online, so send your VIN or part number and we will source it and confirm price and lead time.

Are DBX parts interchangeable with the DB11 or Vantage?

Some are. The DBX shares its V8 family with other Mercedes-AMG-based models, but its body, suspension and many electronic components are DBX-specific. Always verify by VIN.

What brake pads does my DBX need?

It depends on the version, and on whether the car has carbon ceramic brakes. Conventional pads damage ceramic discs, and the discs cannot be resurfaced. Send your VIN so we match the right front and rear pads and wear sensors.

Can you source parts that are not listed here?

Yes. DBX parts are low-volume in some categories, and some are superseded. Send us your VIN or the OEM part number and we will locate it and give you a delivery estimate.

How quickly can I get DBX parts, and are they under warranty?

In-stock parts dispatch from our nearest warehouse (United States or United Arab Emirates), with free shipping over $300. Specialist parts are sourced to order, so send the part number or VIN and we will confirm the lead time. Warranty terms are set out in our warranty policy.