Bentley Continental GT GTC Complete Front Bumper Chrome Grills 4-Piece Set 2016-2018 (aftermarket)

The letter suffixes indicate production revisions or facelift-specific versions, and all variations listed are compatible with 2016-2018 facelift models. Here's what they mean: "E" suffix (3W3807647E): Typically indicates an Enhanced or updated revision of the left side grille specifically for facelift models. "R" suffix (3W3807648R, 681R, 682R): Typically indicates Revised or facelift version - specifically identifies components updated for the 2016 facelift to distinguish them from pre-facelift parts. Why multiple numbers exist: Over the 2016-2018 production run, Bentley made minor manufacturing improvements or used different suppliers, resulting in slight part number variations. Critical point: For 2016-2018 facelift Continental GT/GTC, you may receive either: Standard numbers (3W3807647, 648, 681, 682) OR suffix versions (647E, 648R, 681R, 682R) - both fit correctly. What matters most: The 3W3807 prefix identifies these as second-generation Continental lower bumper grilles, and the specific 647/648/681/682 numbers identify which section (left, right, center-left, center-right). The suffixes primarily help distinguish facelift parts from pre-facelift parts. When ordering this complete set: You'll receive all four necessary sections - the exact suffix variations may depend on current supplier inventory, but all are correct for 2016-2018 facelift models and will fit perfectly together.

NO - This complete grille set is exclusively for 2016-2018 facelift Continental GT/GTC models. It will NOT fit 2011-2015 pre-facelift models. Here's why this is critical: 2016 Facelift = Major Changes: Bentley introduced comprehensive mid-cycle refresh in 2016 affecting the entire front bumper system: Completely revised lower bumper styling with different contours, dimensions, and grille integration across all four sections; Updated grille configurations with new shapes, sizes, and mounting locations for all sections; Modified air intake design requiring different grille dimensions and layouts; New LED headlights integrated with updated bumper design; Different part numbers - facelift grilles have "E" or "R" suffixes or are otherwise distinct from pre-facelift versions. Pre-facelift compatibility: 2011-2015 models use the base part numbers (3W3807647, 648, 681, 682) typically without the "E" or "R" suffixes, and even when numbers look similar, the physical components have different dimensions due to different bumper design. How to verify your model: (1) Model year - 2016-2018 = facelift (this set fits), 2011-2015 = pre-facelift (different set needed), (2) Headlight test - Distinctive LED headlights with integrated LED running lights = facelift, Traditional bi-xenon headlights = pre-facelift, (3) VIN check - G=2016, H=2017, J=2018 (facelift years). Result of wrong installation: Installing facelift grilles on pre-facelift bumpers (or vice versa) results in complete incompatibility—misaligned mounting points, gaps, poor fitment, and unprofessional appearance across all four sections. The investment in four grilles makes proper fitment verification absolutely critical.

Beyond this complete 4-piece grille set, you may need several additional items depending on your situation: Mounting Hardware (Most Common Need): (1) Grille mounting clips - Each of the four grilles uses multiple clips; if any are broken, damaged, or missing (common in collision repairs), you'll need replacement clips for all affected sections, (2) Retaining brackets - Structural mounting hardware for securing grilles to bumper, (3) Fastener kit - Comprehensive screw and clip set for all four grilles. Important consideration: With four separate grilles to install, the likelihood of needing some replacement hardware is higher than single-grille replacements. Assess hardware condition on all four sections during removal. Upper Radiator Grilles (If Also Damaged): This set covers ONLY the lower bumper sections. If your upper main radiator grilles are also damaged, you'll need to order them separately (different part numbers - typically 3W3853683/684 for upper grilles). Installation Supplies: (1) Automotive trim adhesive (if any sections use adhesive mounting), (2) Isopropyl alcohol for surface preparation on all four mounting areas, (3) Clean microfiber cloths for handling (especially chrome), (4) Masking tape for alignment during installation. Professional assessment strongly recommended: Before ordering, have a qualified technician inspect your entire front bumper grille system to identify: Which of the four lower sections need replacement, Whether upper grilles also need replacement, Condition of all mounting hardware across all sections, Any bumper damage requiring repair. Best practice: For a 4-piece installation, order a complete set of replacement mounting clips proactively - the cost is minimal compared to mid-installation delays, and ensures smooth installation across all four sections without waiting for back-ordered hardware.

Yes, we ship to most countries worldwide.

You can track your order directly through our website by following these steps:

1. Go to the Europarts360 Tracking Page.
2. You will see an option to search by Tracking Number or Order ID.
3. Enter your number in the search bar.
4. Click the "Track" button to view the current status of your shipment.

We offer a 14-day return policy for all unused items in original packaging.

This warranty covers all eligible products purchased through our website for 6 months from the date of purchase.